- Oil Coolers
- Oil Cooler Components
- Filter Components
- Hoses, Pipes & Fittings
- Hose Accessories
- Threaded Adapters, Plugs and Caps
- Fuel Sampling
- Quick Connect and Checkvalves
- Insulation & Overbraid
- Filler Caps
- Refuel, Jacking Systems and Quick Release Steering Boss
- Pumps, Fans, Heaters and Accumulators
- Instruments, Gauges
- Tanks and Pots
- Accessories
![]() Oil Pressure SwitchesLow oil pressure switches are offered as alternatives to the" whoops its too late" pressure warning transmitters fitted as original equipment, ours provide a warning when the oil pressure drops below the desired running pressure, they can irritate by actuating a warning when the engine is ticking over but are absolutely essential for spotting signs of trouble in a competition engine. They have a 1/8 NPTF thread so screw into matching thread on T piece and use a suitable pressure gauge adapter on the thread vacated by original transmitter. We also offer a fuel pressure warning switch for carburettor engines, an essential to warn of failing pumps, blocked lines or filters all of which can cause a weak mixture to melt pistons in seconds on a highly stressed engine. A nil pressure fuel switch may be fitted downstream of an electric fuel pump to turn pump off in the event of an accident resulting in fuel line rupture etc | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() T pieces and oil pressure gauge adapters.All engines have a tapping on an oil gallery to take the oil pressure warning transmitter, we make a range of T pieces to screw into this tapping, T pieces have one male thread to screw into the oil gallery, a female thread to take the original transmitter and a female 1/8 NPTF tapping which allows a pressure switch or a 1/8 BSP female pressure gauge line to be attached via a MMS10-3-3 adapter. The chart below shows tapping thread for most engines.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() Warning lightsThese are of little use if they are not immediately visible, ours are 29mm diameter with a choice of red, yellow, green, blue or clear lens, they have a removable diffuser under the lens which may be titled using dry print lettering. A T5.5 side contact bulb is accessed from the front and is sealed against ingress of dust, oil and water. Weight is 1.5 grams. |



