Fuel sampling kits

Fuel sampling kit using a male/female -6JIC tee adaptor to break into existing fuel line, a complete FD90 Aeroquip dry break coupling connected to 2 metres of fuel hose.

The smaller plug half of the coupling remains on the vehicle while the socket half is stored for sampling when required.

We recommend that you have both halves of the coupling so that you can maintain the integrity of your sample.

Fuel sampling kit using a male/male -6JIC tee adaptor to break into existing fuel line together with 2 FBM1012 -6JIC aeroquip hose ends, a complete FD90 Aeroquip dry break coupling connected to 2 metres of fuel hose.

The smaller plug half of the coupling remains on the vehicle while the socket half is stored for sampling when required.

We recommend that you have both halves of the coupling so that you can maintain the integrity of your sample.

Fuel sampling kit using an 8mm push-on aluminium tee adaptor to break into existing fuel line, a complete FD90 Aeroquip dry break coupling connected to 2 metres of fuel hose.

The smaller plug half of the coupling remains on the vehicle while the socket half is stored for sampling when required.

We recommend that you have both halves of the coupling so that you can maintain the integrity of your sample.

As FSK1 but with only the -6JIC male/female aluminium tee adaptor and the plug half of the FD90 Aeroquip dry break coupling (FBM3083) complete with dust cap.

As FSK2 but with only the -6JIC male/male aluminium tee adaptor (FBM2083) and the plug half of the FD90 Aeroquip dry break coupling (FBM3083) complete with dust cap.

As FSK3 but with only the 8mm push-on aluminium tee adaptor, and the plug half of the FD90 Aeroquip dry break coupling (FBM3083) complete with dust cap.